Lead-acid Battery Water Filling Gun/Battery Automatic Water Adding System

Specification

Features of water filling gun,water feeder:

1.Connect the hose to the water inlet and put the end into distilled or deionized water.

2. Before adding water to the battery, adjust the limit clamp to an appropriate position and lock it according to the needs of use.

3. When filling water, put the battery filling plug into the liquid injection valve port, press the water filling switch, and the
water filling gun starts to work. The water is pumped from the water inlet, and the target battery is filled with water through
the liquid injection valve port. At this time, the working indicator light is green. When water is full, indicator light turns red, adding water complete 

4. When the liquid level meets the requirements, the water filling gun will automatically stop working, and the working indicator will turn red. In order to avoid accidental touches, the water filling switch will fail at
this time. After the muzzle is removed from the battery, the water filling switch function will return to normal.

What are the details of our products that deserve attention?

Liquid injection valve: use buoyancy to close the water injection port after the hand is full, the principle is simple and reliable

What problems can our products solve? Why can it be solved?

The battery life of lead-acid batteries caused by artificial watering and leakage cannot be guaranteed Complete replacement of manual water maintenance: when to add water, how to add it, and how much to add Solve the cumbersome, error-prone and unstable manual maintenance in battery water maintenance

 What distinguishes our products from other similar products?

Taking a step further in the mainstream solutions in the market, relying on the intelligent water filling controller to completely eliminate the manual link.